PicoBNC+ current clamp: 2000A AC/DC To take advantage of the PicoBNC+ capabilities, the TA388 is powered from the laptop via the Scope. The shape of this new clamp has a nice narrow-width profile. The 2000A clamp is automatically recognised by PicoScope software when it is connected to the scope, and is auto-ranged in the software requiring no m..

PicoBNC+ current clamp: 60A AC/DC To take advantage of the PicoBNC+ capabilities, this current clamp is powered from the laptop via the Scope. The shape of the new clamp is different and the performance is substantially higher than the previous clamp. The 60A clamp is automatically recognised by PicoScope software when it is connected to the Pic..

The 200 A / 2000 A current clamp with BNC connector allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. Before the launch of this probe we recommended the TA019 (600 A) for working on the starting and..

The TA018 current clamp with BNC adaptor is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps. The current clamp has two calibration settings, set by a slider switch on the handle of the probe. 1 mV/10 m..

The TA019 current clamp with BNC connector is ideal for use with a PicoScope automotive oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests. The current clamp can measure up to 600 A (AC or DC). In use there is no need to break into the circuit or disturb the isolation as the ..

The 30 A precision current clamp with BNC connection allows you to measure from 5 mA up to 30 A without cutting, disconnecting or stripping the wire. It is ideal for measuring the currents in sensors and actuators across most modern passenger and commercial vehicles. The TA189 provides improved sensitivity, lower noise and faster response. Featu..

The PicoBNC+® equipped TA496 is a natural choice if you are a PicoScope 4225A and 4425A user looking to add a compact low amps clamp to your PicoScope probe collection. The PicoBNC+® 60 A DC compact current clamp’s reduced form factor fits comfortably in your hand and improves accessibility in tight and difficult to access test loc..

The TA408 is a high-end current clamp designed for the most demanding Vehicle Manufacturer requirements. This 100 A current probe is based on closed-loop technology, is powered directly from the scope, and has a built-in power on zero function so no buttons are required. It is designed for battery drain applications and features excellent resolu..