TA487 Pico Auto IEPE signal Conditioner
$405.35
incl. GST
Viewed 13355 times
Share This
Categories
Cart
Account
Search
Recent View
All Categories
×
- EV & Hybrid Test Equipment
- Scan Tools and accessories
- Software Updates
- Gas analysers
- Automotive Oscilloscopes
- Oscilloscope Accessories
- J2534 Pass Thru
- Vehicle Power Stabiliser
- Programming Tools
- Fuel System Test Equipment
- Information
- Smoke Machine
- Multimeters
- TPMS Tyre Pressure Monitoring Systems
- Specialist Tools
- Borescopes
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Technical specifications | |
---|---|
Bandwidth (–3 dB) | 0.1 Hz to 30 kHz |
Input connection (from transducer) | BNC female |
Signal gain | 1:1 |
Accuracy | ±1% (additional to transducer and measuring instrument accuracy) |
Noise | < 60 μV RMS |
Supply voltage to transducer | 28 V ±3% |
Supply current to transducer | 4 mA ±5% |
Discharge time constant | 1.85 s |
Required measuring instrument impedance | 1 MΩ (Greater than 1 MΩ can be used, but will affect discharge time constant and low-frequency response) |
Power connection | USB mini B |
Power requirements | USB (5 V DC, < 100 mA) |
Dimensions | 76 mm x 30 mm x 15 mm |
Weight | 30 g |
Operating temperature range | 0 to 40 °C |
Storage temperature range | –20 to +60 °C |
Operating humidity range | 5 to 80 %RH non-condensing |
Storage humidity range | 5 to 95 %RH non-condensing |
Safety compliance | Designed to EN 61010-1:2010+A1:2019 |
EMC compliance | Tested to EN 61326-1:2013 and FCC Part 15 Subpart B |
Environmental compliance | RoHS, WEEE and REACH compliant |
Product Description
The TA487 is an interface that allows industry-standard IEPE (integrated electronic piezoelectric) sensors to be used with any oscilloscope or data acquisition device with BNC inputs. The device is powered from any USB port, using the cable supplied, and provides a 4mA constant current source to power a connected IEPE sensor.
A TA095 IEPE accelerometer is also available from Pico Technology. Other IEPE sensors, such as microphones, pressure sensors, and strain gauges are available from other manufacturers. The sensor must be terminated with a BNC(m) connector.