Pico BNC 0-30 Amp Current Clamp
$397.87
incl. GST
Viewed 15719 times
Share This
Categories
Cart
Account
Search
Recent View
All Categories
×
- EV & Hybrid Test Equipment
- Scan Tools and accessories
- Software Updates
- Gas analysers
- Automotive Oscilloscopes
- Oscilloscope Accessories
- J2534 Pass Thru
- Vehicle Power Stabiliser
- Programming Tools
- Fuel System Test Equipment
- Information
- Smoke Machine
- Multimeters
- TPMS Tyre Pressure Monitoring Systems
- Specialist Tools
- Borescopes
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Example Current waveform below from a Piezo diesel injector using Pico Scope.
Electrical data |
|
---|---|
Nominal current | 30 A AC peak or DC |
Measuring range (s) | 30 mA to 30 A DC (accurate) 5 mA to 30 A DC (usable) |
Overload capacity | 500 A for 60 s |
Output sensitivity | 100 mV/A |
Accuracy | ±(2% of reading ± 2 mA) |
Resolution | ± 1 mA DC after filtering |
di/dt tracking capability | > 20 A/µs |
Conductor position sensitivity | ± 1% relative to center |
Temperature coefficient | 0.1 x specified accuracy/°C (0 °C to 18 °C, 28 °C to 50 °C) |
Frequency range | DC to 20 kHz (–0.4 dB) |
Battery type | 9 V PP3, MN 1604, 6F22, 6LR61 |
Min. load impedance | 1 MΩ |
General data |
|
---|---|
Max. conductor size | 19 mm diameter |
Output cable and connectors | 2 m long coax terminated with safety BNC connector |
Operating temperature | +4 °C to +40 °C |
Storage temperature (excluding battery) | –20°C to +70°C |
Humidity | 0 to 80 %RH |
Altitude | 0 to 2000 m |
Weight | 300 g |
Dimensions (H x W x D) | 200 mm x 72 mm x 38 mm |
Pollution degree | 2 |
Safety | EN 61010-1:2010 EN 61010-2-032:2012 CAT IV 600 V, CAT III 1000 V |
EMC | EN 61326-1:2006 EN 61326-2-2:2006 |
Environmental | RoHS and WEEE compliant |
Example Current waveform below from a Piezo diesel injector using Pico Scope.
Product Description
The TA234 is a 30 A current clamp with BNC adaptor. The extended measuring jaws allow measurement in a confined space. When measuring DC, a simple thumbwheel on the probe allows zero adjustment.
This current clamp is ideally suited for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup.