TA496 PicoBNC+ 60 A DC compact current clamp

$374.42 incl. GST

Brand: Pico Technology

Product Code: TA496

Availability: In Stock

Viewed 14165 times

Orders closed until after 3PM 10/1/2025

Add to wishlist
Add to compare

Categories Cart Account Search Recent View

Description
Specifications

Electrical characteristics
Current measurement ranges	Two ranges: ±10 A peak, ±60 A peak
Frequency range	DC to 40 kHz (−3 dB)
Power control	Power on when PicoBNC+ is connected
Resolution	5 mA (with 20 kHz scope hardware filter and 500 Hz software filter)
DC accuracy At 23 °C ± 5 °C, 70 %RH maximum When used with a PicoScope 4225A or 4425A oscilloscope	0 to 60 A: ±4% of reading ± 630 mA 0 to 50 A: ±4% of reading ± 630 mA 0 to 20 A: ±2% of reading ± 190 mA 0 to 10 A: ±2% of reading ± 65 mA 0 to 5 A: ±2% of reading ± 35 mA 0 to 2 A: ±2% of reading ± 20 mA 0 to 1 A: ±2% of reading ± 20 mA 0 to 0.5 A: ±2% of reading ±20 mA
Zero offset adjustment	Automatic on connection to PicoScope. Manual button in software.
Coupling to PicoScope	AC/DC, selectable in software.
Filtering	20 kHz hardware lowpass filter in PicoScope. Enabled by default, selectable by user.
Remanence (0 A—60 A—0 A)	300 mA typical
Working voltage	CAT II 300 V, pollution degree 2
General characteristics
Maximum conductor diameter	9 mm (0.35")
Output connection	PicoBNC+^®
Cable length	2.85 m (9' 4")
Dimensions	167 mm x 68 mm x 26 mm (6.6" x 2.7" x 1.0")
Weight	0.25 kg (8.8 oz)
Environmental specifications
Operating temperature range	0 to 50 °C
Storage temperature range	−20 to +70 °C
Operating humidity	70 %RH, max., noncondensing
Storage humidity	80 %RH, max., noncondensing
Compliance
Safety	EN 61010-1, EN 61010-2-032
Environmental	RoHS, WEEE
EMC	CE, FCC, UKCA

Product Description

The PicoBNC+® equipped TA496 is a natural choice if you are a PicoScope 4225A and 4425A user looking to add a compact low amps clamp to your PicoScope probe collection.

The PicoBNC+® 60 A DC compact current clamp’s reduced form factor fits comfortably in your hand and improves accessibility in tight and difficult to access test locations, making it easier to hold and use around vehicles.

The in-built PicoBNC+® technology makes the TA496 easy to use. As the clamp is scope-powered there are no batteries for you to change and it is always ready to go. Automatic probe recognition saves you from having to select the probe in the software. Automatic range switching means you don’t have to change the range on the probe itself, just select a range in the software and the probe will take care of itself. You don’t even have to zero the clamp, PicoBNC+® can take care of that too.

The clamp’s signal accuracy and clarity are improved, particularly in low current ranges. Its cleaner waveforms bring noticeably better diagnostic accuracy to your workshop.