TDB008 Parking Sensor Tester
- ADAS - Advanced driver-assistance system
- EV & Hybrid Test Equipment
- Scan Tools and accessories
- Software Updates
- Gas analysers
- Automotive Oscilloscopes
- Oscilloscope Accessories
- J2534 Pass Thru
- Vehicle Power Stabiliser
- Programming Tools
- Fuel System Test Equipment
- Information
- Smoke Machine
- Multimeters
- TPMS Tyre Pressure Monitoring Systems
- Specialist Tools
- Borescopes
Your shopping cart is empty!
Features:
Internal Wide range microphone
External remote microphone pick up
Group test of up to 8 sensors
Sensitivity adjustment
Signal detection as: Peak scan, bar graph, frequency analyser
Battery level visual indicator and audible low battery warning
Audible tone for detecting ultrasonic signal (user selectable/programmable)
Auto Power off - User programmable for 4, 10, 15 mins or none
Adjustable screen contrast
TDB008 Specifications:
Operating voltage: 6 volts nominal
Operating current: 50mA average
Power consumption: 300mW
Detection range (frequency): 30KHz to 70KHz
Microphone range: 10Hz to >80KHz
Oscilloscope pulse mode: 25uS/div
Peak Scan time (full screen): 2 seconds
Battery type: 4 x AAA batteries Alkaline or NiMh rechargeable
Battery life: 20 hours (based on 1000mA/h Alkaline)
Display: 128 x 64 dot matrix with back light
Temp range: 0 to 50'C IP rating IP61
Size: 170mm*90mm*40mm
TDB008 Parking Sensor Tester Brochure
TDB008 Parking Sensor tester Manual
Product Description
TDB008 Parking Sensor Tester
The TDB008 is a hand held device which has been designed to give a visual indication of the output signals of parking sensors using ultrasonic sensors on a range of vehicles.
Many parking sensor systems now fitted to the latest vehicles require the engine running and the car in reverse gear to be activated. In addition to this the vehicles that have parking assist will shut down if there is a problem and diagnosis of the sensors requires 2 people to check. The TDB008 with its extended pick lead allows a single person to operate the vehicle safely and test the sensors while in the drivers seat.
This makes the TDB008 both a time saving product, but also ensures the system can be tested safely and easily by the workshop technician.
The internal wide frequency range microphone covers the typical ultrasonic automotive range of 34.8 KHz to 68 KHz. The LCD screen can show the signal as a pulse, an average value in either graph form, as a bar graph or a waveform.
The TDB008 also has the facility to display the operating frequency of the ultrasonic sensor together with its signal strength.
The Quick Test also provides a way to check all the sensors together, and compare the results to ensure they are all operating within their normal specifications.
Powered by 4 AAA batteries, the TDB008 has an operational time of over 20 hours of use, and it also includes a low battery warning and programmable auto switch off time.